![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography, Stairs](https://images.adsttc.com/media/images/60f5/8693/dbcb/e11b/e1d0/0a78/newsletter/striatus-brg-zha-c-naaro-1.jpg?1626703568)
-
Architects: Block Research Group, Zaha Hadid Architects
- Area: 50 m²
- Year: 2021
-
Photographs:naaro, in3d, Alessandro Dell'Endice, Tom van Mele
-
Manufacturers: Holcim
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Interior Photography](https://images.adsttc.com/media/images/60f5/8706/dbcb/e11b/e1d0/0a81/newsletter/striatus-brg-zha-c-naaro-7.jpg?1626703682)
Text description provided by the architects. Striatus is an arched, unreinforced masonry footbridge composed of 3D-printed concrete blocks assembled without mortar. Exhibited at the Giardini della Marinaressa during the Venice Architecture Biennale until November 2021, the 16x12-metre footbridge is the first of its kind, combining traditional techniques of master builders with advanced computational design, engineering, and robotic manufacturing technologies.
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography, Stairs](https://images.adsttc.com/media/images/60f5/8701/dbcb/e11b/e1d0/0a7e/newsletter/striatus-brg-zha-c-naaro-10.jpg?1626703678)
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography](https://images.adsttc.com/media/images/60f5/86ca/dbcb/e11b/e1d0/0a7b/newsletter/striatus-brg-zha-c-naaro-6.jpg?1626703623)
The name “Striatus” reflects its structural logic and fabrication process. Concrete is printed in layers orthogonal to the main structural forces to create a “striated” compression-only funicular structure that requires no reinforcement.
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography](https://images.adsttc.com/media/images/60f5/87be/fe5d/5b01/6504/a130/newsletter/striatus-construction-05-alessandro-dellendice.jpg?1626703832)
3D printing can be used to build load-bearing concrete structures that require significantly less material and no steel reinforcement or mortar. ETH architects and engineers from the Block Research Group in collaboration with Zaha Hadid Architects and other partners from the industry showed how this works with a footbridge in Venice.
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography, Stairs](https://images.adsttc.com/media/images/60f5/8696/dbcb/e11b/e1d0/0a79/medium_jpg/striatus-brg-zha-c-naaro-3.jpg?1626703570)
Millions of new buildings all over the world are being constructed with reinforced concrete, even though this type of construction generates large amounts of CO2 emissions. The steel used for the reinforcement and the cement for the concrete is especially problematic in this regard. ETH researchers have now presented a way to reduce both, in a real project.
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography, Stairs](https://images.adsttc.com/media/images/60f5/86ae/dbcb/e11b/e1d0/0a7a/newsletter/striatus-brg-zha-c-naaro-2.jpg?1626703594)
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Image 25 of 30](https://images.adsttc.com/media/images/60f5/8830/dbcb/e159/2de0/c935/newsletter/1-striatus-plan.jpg?1626704215)
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography](https://images.adsttc.com/media/images/60f5/8705/dbcb/e11b/e1d0/0a80/newsletter/striatus-brg-zha-c-naaro-9.jpg?1626703681)
The Block Research Group teamed up with the Computation and Design Group at Zaha Hadid Architects to build a 12-by-16-metre arched footbridge in a park in Venice – entirely without reinforcement.
Using an additive process, the construction dubbed “Striatus” was built with concrete blocks that form an arch much like traditional masonry bridges. This compression-only structure allows the forces to travel to the footings, which are tied together on the ground. The dry-assembled construction is stable due to its geometry only.
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Interior Photography](https://images.adsttc.com/media/images/60f5/87c1/fe5d/5b01/6504/a132/newsletter/striatus-printing-03-c-in3d.jpg?1626703832)
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Interior Photography](https://images.adsttc.com/media/images/60f5/87ad/fe5d/5b01/6504/a12c/newsletter/striatus-construction-01-tom-van-mele.jpg?1626703812)
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Exterior Photography](https://images.adsttc.com/media/images/60f5/87ae/fe5d/5b01/6504/a12d/newsletter/striatus-construction-03-tom-van-mele.jpg?1626703813)
What is completely new is the type of 3D-printed concrete, which the researchers developed together with the company Incremental3D. The concrete is not applied horizontally in the usual way but instead at specific angles such that they are orthogonal to the flow of compressive forces. This keeps the printed layers in the blocks nicely pressed together, without the need for reinforcement or post-tensioning. The special concrete ink for the 3D printer was developed by the company Holcim precisely for this purpose.
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Image 27 of 30](https://images.adsttc.com/media/images/60f5/8830/fe5d/5b01/6504/a139/newsletter/3-striatus-elevation-b.jpg?1626704295)
ETH professor Philippe Block said: “This precise method of 3D concrete printing allows us to combine the principles of traditional vaulted construction with digital concrete fabrication to use material only where it is structurally necessary without producing waste.”
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Interior Photography, Facade](https://images.adsttc.com/media/images/60f5/86e6/dbcb/e11b/e1d0/0a7d/medium_jpg/striatus-brg-zha-c-naaro-5.jpg?1626703649)
Because the construction does not need mortar, the blocks can be dismantled, and the bridge reassembled again at a different location. If the construction is no longer needed, the materials can simply be separated and recycled.
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Interior Photography](https://images.adsttc.com/media/images/60f5/87c6/fe5d/5b01/6504/a136/newsletter/striatus-printing-05-c-in3d.jpg?1626703835)
![Striatus Bridge / Zaha Hadid Architects + Block Research Group - Interior Photography](https://images.adsttc.com/media/images/60f5/87af/fe5d/5b01/6504/a12e/newsletter/striatus-construction-07-tom-van-mele.jpg?1626703816)