Gallery of Villa in Noto / Westway Architects

Related Products

Made of European solid wood. Oiled and waxed. Rectangular or square.

Table, base made of natural barked hornbeam trunk section, top in waxed iron plate, 240x100 cm. Available also the 200 cm length dimension (Brick 34).

Save

Check on Architonic

Coffee tables available in the sizes 70x100cm and 100x100cm, consisting of a supporting frame in solid Burma Teak wood section 90x35mm treated with vegetable oil finishing with hydro-oil repellent characteristics. Black milled HPL 8mm thick panel inset into the supporting frame and supported by corner and central moulded supports in recycled and regenerated polyamide, fixed to the supporting by means of stainless steel screws. Coffee tabletop (thickness 2cm) with 45° bevelled edges, fixed to the HPL panel, in plywood for outdoor use veneered with Burma Teak slabs always divided into two (only for the size 70x100cm) or three sections. Feet in solid Teak Burma wood Ø40mm, fixed to the corner supports through an embedded bushing, and floor support guaranteed by black adjustable elements.

Save

Check on Architonic

Methacrylate - Metal IP20 Ø 600 110-240 V - 50/60 Hz - 18 W LED (Down) - 3000K - 350 lm | LED (Up) - 3000K - 1050 lm US VERSION AVAILABLE Ø 900 110-240 V - 50/60 Hz - 18 W LED (Down) - 3000K - 350 lm | LED (Up) - 3000K - 1050 lm US VERSION AVAILABLE

Save

Check on Architonic

Faced with the challenge of lighting very large spaces, this year the Djembé collection is growing in every sense of the word: starting in 2020, we are introducing new ceiling and pendant versions that are over a meter in diameter, featuring the same finishes as the rest of the collection. The pendant version is notable for its intense visual impact, combining beauty and strength as it projects large amounts of indirect light.

Save

Check on Architonic

Foldable, without armrests, solid natural teak slats, straight or curved. SH 44 cm, W x D x H: 45 x 59 x 84 cm

Rectangular dining table available for indoor or outdoor. Indoor version: wooden table consisting of a double-panelled top of 40mm, in balanced fir wood, reinforced by steel tubulars of 25x15mm, veneered with 10/10 plates and edged with solid wood of 4mm on the perimeter. Legs in multilayer birch veneered with 10/10 plates. Finishing in natural chestnut, charcoal dyed chestnut or Stone Oak® with water-based acrylic paintf inish. Legs screwed to the top bys teel plates finished with polyurethane lacquer. Indoor/outdoor version: aluminum table consisting of at op in 28mm alveolar aluminum completed with a1 mm aluminum-sheet with foldingf inishing and legs in5 mm alveolar aluminum panels with folding finishing. Primer for aluminum and outdoor polyurethane lacquer in RAL-K7 9010 white or 9017 black, or “cement effect” finish col. Chiaro or col. Suuro . Legs screwed to the top by steel plates finished with outdoor polyurethane lacquer.

Save

Check on Architonic

The table mod. at_16 with a table top made of HPL and a frame of stainless steel tube is characterized by its formal lightness.The surface is very sturdy and easy to maintain what makes this model perfectly suitable for outdoor commercial areas. Materials: The table top is made of HPL coloured sparrow brown.. The frame is made of polished stainless steel square tube. Details: The table top is divided by a longitudinal joint of approx. 3 mm. The legs can be made without bottom crossbars and are demountable. Optionally with ground mounting. The table is suited for permanent outdoor use. h (cm) | l (cm) | w (cm) 74 x 160 x 75 / 90 74 x 180 x 75 / 90 74 x 200 x 75 / 90 74 x 220 x 75 / 90 74 x 240 x 75 / 90

Save

Check on Architonic

Squared table with design top made of 2 solid Michelangelo marble slabs and 2 solid black stained oak slabs, both with a 7cm thickness . Burnished brass inlay and perforated wooden leg with Lacca 61 Bronze finish. Dimensions in cm: 150 x 150 x 75 CUSTOMIZATION: Available in the round, square or rectangular version. Top available in White Calacatta, Black Marquina or White Michelangelo marble. Also available in solid wood in all the essences of the collection, in dyed wood, in Lacca 61 or in aniline dyed wood in all RAL colours. Legs available in walnut Canaletto or in Lacca 61. Available with integrated spotlights.

Save

Check on Architonic

The characteristic feature of the filigree table is the combination of solid wood and hot rolled steel. A significant detail is the all-round set-back frame the table top is screwed onto with a 5 mm shadow gap. The table is suitable for the living or working area. Materials: The oiled table top is made of solid, glued wood with a 42 mm panel thickness. The oiled legs are made of hot rolled steel profiles. Various woods are available. Details: The table top is divided by a longitudinal joint of approx. 3 mm. The legs are divided by a joint and demountable. For the use in commercial areas we recommend a colourless matt finish for the table surface. h (cm) | l (cm) | w (cm) 74 x 180 x 75 / 90 74 x 200 x 75 / 90 74 x 220 x 75 / 90 74 x 240 x 75 / 90 74 x 260 x 75 / 90 74 x 280 x 75 / 90 74 x 300 x 75 / 90

Save

Check on Architonic

Technical features Base: metal feet with burnished finishing. Top: MDF panel with plaster concrete effect in colours about: RAL 9003 - RAL 9011 - RAL 7006 - RAL 7044 - RAL 7015. Top finishing: dirt repellent treatment.

Save

Check on Architonic

The special feature of the square table mod. at_13 is its single leg made of steel which provides legroom all the way around. The combination of steel and solid wood gives this table a unique character. Materials: The table top is made of solid, glued wood with a 42 mm panel thickness. The surface is oiled except when choosing maple wood. The square single leg is made of anthracite coloured rolled steel with an oiled surface. Various woods are available. Details: The table top is demountable. For the commercial area we recommend a colourless matt finish for the table surface. h (cm) | l (cm) | w (cm) 74x 120 x 120 74 x 140 x 140 74 x 160x 160

Save

Check on Architonic

Villa in Noto / Westway Architects

University Hospital in Tangier / Architecturestudio + Hajji & Elouali

Selected Projects

Perforated House / AR43 Architects

Selected Projects