Blantyre House / Williamson Chong Architects - Exterior Photography, Facade

Blantyre House / Williamson Chong Architects - Interior Photography, Stairs, Handrail

Blantyre House / Williamson Chong Architects - Exterior Photography, Door, Facade

Blantyre House / Williamson Chong Architects - Interior Photography, Kitchen, Table, Countertop

Blantyre House / Williamson Chong Architects - Interior Photography, Kitchen, Chair

Blantyre House / Williamson Chong Architects - Image 6 of 19

Blantyre House / Williamson Chong Architects - Interior Photography, Bedroom, Bed

Blantyre House / Williamson Chong Architects - Interior Photography, Bathroom

Blantyre House / Williamson Chong Architects - Image 9 of 19

Blantyre House / Williamson Chong Architects - Interior Photography, Facade, Table

Blantyre House / Williamson Chong Architects - Interior Photography, Bedroom

Blantyre House / Williamson Chong Architects - Interior Photography, Kitchen, Countertop, Sink

Blantyre House / Williamson Chong Architects - Interior Photography, Kitchen

Blantyre House / Williamson Chong Architects - Image 14 of 19

Blantyre House / Williamson Chong Architects - Image 15 of 19

Blantyre House / Williamson Chong Architects - Image 16 of 19

Blantyre House / Williamson Chong Architects - Image 17 of 19

Blantyre House / Williamson Chong Architects - Image 18 of 19

Blantyre House / Williamson Chong Architects - Image 19 of 19

Blantyre House / Williamson Chong Architects

7 / 19

Zoom image | View original size

Interior Photography Houses Bedroom Bed

Share

Share this image

Facebook
Twitter
Mail
Pinterest

Or

Previous Project

Sam Jacob & Wouter Vanstiphout on Curating "A Clockwork Jerusalem"

Selected Projects

4 Springs Lane / Robert M. Gurney Architect

Selected Projects

✕

✕

Related Products

The so-called Eiffel Tower base of the DSR chair (Dining Height Side Chair Rod Base), an intricate and graceful construction made of steel wire, combines light, elegant forms with structural strength. The organically shaped plastic seat shell is available in various colours and upholstery options, allowing this distinctive classic by Charles and Ray Eames to be adapted to a wide range of individual needs and preferences. Seat shell: dyed-through polypropylene. All models are available with a seat cushion (screwed to the seat shell) or full upholstery. The fully upholstered version has moulded polyurethane foam padding covered in fabric, attached to the shell with a welted edge. Different shell and upholstery colours and various bases provide a multitude of possible combinations. Options: the Eames Plastic Chair is available as a visitor chair, dining chair, rocking chair, swivel chair or in stacking versions and with ganging brackets for row seating. Beam-mounted shells are suited for use in waiting areas. Base: non-stacking four-legged wire base with cross struts. The powder-coated version is suitable for outdoor use. (DSR = Dining Height Side Chair Rod Base) Note: special additives retard the fading of colours due to UV radiation. However, if the chair is exposed to sunlight for prolonged periods, the colour may change over time. We recommend limited exposure to sunlight. 465 x 830 x 550 mm

Check on Architonic

A four-legged tubular steel base and the organically shaped Side Chair shell are the defining components of the visually understated DSX (Dining Height Side Chair X-Base). The seat shell comes in various colours and upholstery options while the base is available in a chrome-plated or powder-coated version, the latter of which can be used in gardens or on terraces. Seat shell: dyed-through polypropylene. All models are available with a seat cushion (screwed to the seat shell) or full upholstery. The fully upholstered version has moulded polyurethane foam padding covered in fabric, attached to the shell with a welted edge. Different shell and upholstery colours and various bases provide a multitude of possible combinations. Options: the Eames Plastic Chair is available as a visitor chair, dining chair, rocking chair, swivel chair or in stacking versions and with ganging brackets for row seating. Beam-mounted shells are suited for use in waiting areas. Base: non-stacking four-legged tubular steel base. The powder-coated version is suitable for outdoor use. (DSX = Dining Height Side Chair X-Base) Note: special additives retard the fading of colours due to UV radiation. However, if the chair is exposed to sunlight for prolonged periods, the colour may change over time. We recommend limited exposure to sunlight. 465 x 830 x 550 mm

Check on Architonic

The Plastic Chairs by Charles and Ray Eames were the very first chairs to be developed out of plastic for industrial production. Their organically shaped seat shells can be combined with a variety of different bases. The DAX chair (Dining Height Armchair X-Base) has a visually understated four-legged tubular steel base, which comes in a powder-coated version that is also suited for outdoor applications. Seat shell: dyed-through polypropylene. All models are available with a seat cushion (screwed to the seat shell) or full upholstery. The fully upholstered version has moulded polyurethane foam padding covered in fabric, attached to the shell with a welted edge. Different shell and upholstery colours and various bases provide a multitude of possible combinations. Options: the Eames Plastic Chair is available as a visitor chair, dining chair, rocking chair, swivel chair or in stacking versions and with ganging brackets for row seating. Beam-mounted shells are suited for use in waiting areas. Base: four-legged tubular steel base, chrome-plated or powder-coated. The powder-coated version is suitable for outdoor use. (DAX = Dining Height Armchair X-Base) Note: special additives retard the fading of colours due to UV radiation. However, if the chair is exposed to sunlight for prolonged periods, the colour may change over time. We recommend limited exposure to sunlight. 625 x 830 x 600 mm

Check on Architonic

Check on Architonic

Check on Architonic

Check on Architonic

Check on Architonic

The FLAI bed – better than flying? Not only the name of the bed FLAI relates to the thought of flying, straight and clear lines create a harmonious design and contribute to the floating optic of this bed. The design duo kaschkasch – which means the highly trained carpenters Forian Kallus and Sebastian Schneider- inspire once again through the clever combination of minimalism and poetry. The bed is available either in white or anthracite, thanks to the oiled and waxed birch edge it appears in simple classiness and gives every room a natural warmth. Five different metal shelves can be put on the bedframe allowing an easy handling of magazines, alarm clock and mobile phone. Thanks to wool-felt inlays a quiet and careful use of the spacious shelves is guaranteed. Whether with or without headpiece for further storage space the bed FLAI unites timeless design and high practical use. The additional 3-side-led-lighting makes the bed FLAI completely a high-end-product. FLAI with ambient light The bed FLAI can also be delivered with an integrated three-sided LED-lighting. Therefore a LED-light-band will be mounted on the left, on the right and on the front side below the bedframe and connected with a 220 Volt power supply on the head end. The LED-lighting is dimmable.

Check on Architonic

Since the early 1950s, when Charles and Ray Eames developed their Plastic Chairs, these furnishings have become icons of American mid-century modernism. In particular, the DAR chair (Dining Height Armchair Rod Base) stands out as an inimitable classic design combining light, elegant forms with structural strength in the intricate steel wire construction of its 'Eiffel Tower' base. Seat shell: dyed-through polypropylene. All models are available with a seat cushion (screwed to the seat shell) or full upholstery. The fully upholstered version has moulded polyurethane foam padding covered in fabric, attached to the shell with a welted edge. Different shell and upholstery colours and various bases provide a multitude of possible combinations. Options: the Eames Plastic Chair is available as a visitor chair, dining chair, rocking chair, swivel chair or in stacking versions and with ganging brackets for row seating. Beam-mounted shells are suited for use in waiting areas. Base: wire base with cross struts, chrome-plated or powder-coated finish. The powder-coated version is suitable for outdoor use. (DAR = Dining Height Armchair Rod Base) Note: special additives retard the fading of colours due to UV radiation. However, if the chair is exposed to sunlight for prolonged periods, the colour may change over time. We recommend limited exposure to sunlight. 625 x 830 x 600 mm

Check on Architonic

Seat shell: dyed-through, glass-fibre reinforced polyester (fibreglass). Just like the earliest models, today's fibreglass shells are also slightly transparent in some colours. Optionally available with a moulded foam seat cushion (screwed to the seat shell); cushion can be replaced by the Vitra service team. Base: non-stackable wooden base in various shades of maple or honey-toned ash, stained and lacquered finish. Steel rod cross struts in basic dark. (DAW = Dining Height Armchair Wood Base) Origin of wood: ash (Fraxinus excelsior) and maple (Acer platanoides) from Western Europe and/or Poland. 625 x 830x 600 mm

Check on Architonic

Seat shell: dyed-through, glass-fibre reinforced polyester (fibreglass). Just like the earliest models, today's fibreglass shells are also slightly transparent in some colours. Optionally available with a moulded foam seat cushion (screwed to the seat shell); cushion can be replaced by the Vitra service team. Base: non-stackable wooden base in various shades of maple or honey-toned ash, stained and lacquered finish. Steel rod cross struts in basic dark. (DAW = Dining Height Armchair Wood Base) Origin of wood: ash (Fraxinus excelsior) and maple (Acer platanoides) from Western Europe and/or Poland. 625 x 830x 600 mm

Check on Architonic

Today the Plastic Chairs by Charles and Ray Eames seem like archetypes of the genre of chairs whose shell can be combined with diverse bases. The combination of the wooden base with the plastic shell of the DAW (Dining Height Armchair Wood Base) produces a rich contrast of materials. The seat shells are also available with a seat cushion or full upholstery. Seat shell: dyed-through polypropylene. All models are available with a seat cushion (screwed to the seat shell) or full upholstery. The fully upholstered version has moulded polyurethane foam padding covered in fabric, attached to the shell with a welted edge. Different shell and upholstery colours and various bases provide a multitude of possible combinations. Options: the Eames Plastic Chair is available as a visitor chair, dining chair, rocking chair, swivel chair or in stacking versions and with ganging brackets for row seating. Beam-mounted shells are suited for use in waiting areas. Base: wooden base in various shades of maple or honey-toned ash, stained and lacquered finish. Steel rod cross struts in basic dark. (DAW = Dining Height Armchair Wood Base) Origin of wood: ash (Fraxinus excelsior) and maple (Acer platanoides) from Western Europe and/or Poland. 625 x 830 x 600 mm

Check on Architonic

Check on Architonic

The LAR seems to have been one of Charles and Ray's favourite designs: it can be spotted in numerous vintage photographs of the legendary Eames House in Pacific Palisades – both indoors and out. This also reveals how lightweight the chair is, and how easily it can be moved around. Seat shell: dyed-through polypropylene. All models are available with a seat cushion (screwed to the seat shell) or full upholstery. The fully upholstered version has moulded polyurethane foam padding covered in fabric, attached to the shell with a welted edge. Different shell and upholstery colours and various bases provide a multitude of possible combinations. Options: the Eames Plastic Chair is available as a visitor chair, dining chair, rocking chair, swivel chair or in stacking versions and with ganging brackets for row seating. Beam-mounted shells are suited for use in waiting areas. LAR base: wire base with cross struts, chrome-plated or powder-coated finish. Seat height 256 mm. (LAR = Lounge Height Armchair, Rod Base) 625 x 630 x 610 mm

Check on Architonic

The Plastic Chairs number among the most well-known designs by Charles and Ray Eames. One model has always stood out in this large family of chairs: the Rocking Armchair Rod Base (RAR). Despite compact dimensions, it offers pleasant comfort even for taller users, and is also available with a seat cushion or full upholstery. The RAR is a fully-fledged armchair, whose iconic shape and rocker base on wooden runners adds a striking accent to any living room. Seat shell: dyed-through polypropylene. All models are available with a seat cushion (screwed to the seat shell) or full upholstery. The fully upholstered version has moulded polyurethane foam padding covered in fabric, attached to the shell with a welted edge. Different shell and upholstery colours and various bases provide a multitude of possible combinations. Options: the Eames Plastic Chair is available as a visitor chair, dining chair, rocking chair, swivel chair or in stacking versions and with ganging brackets for row seating. Beam-mounted shells are suited for use in waiting areas. RAR base: wire base with cross struts, chrome-plated or powder-coated, solid maple runners. (RAR = Rocking Armchair Rod Base) Origin of wood: maple (Acer platanoides) from Western Europe and/or Poland. 630 x 760 x 810 mm

Check on Architonic

«Max» is modular in design. Available with headboard and/or bedside tables.The bedside tables can be slotted effortlessly onto the frame and are freely moveable. Oak, nature laquered Mahagoni, nature laquered Mahagoni, stained laquered Mahagoni, black stained laquered L 200, B 140/160/180, H 24cm

Check on Architonic

MATERIAL Solid wood – Ash white oiled, oak, knotty oak, oak colour stain, American cherry, American walnut, knotty American walnut, European walnut Upholstered headboard: Removable leather and fabric cover Back of headboard with lining fabric For freestanding beds upholstery with original fabric or leather available SURFACE Impregnated with natural hardwax-oil Oak colour stain: matt lacquered VERSION In further sizes available Comfort height: Bedside and feet each heightened 4 cm DIMENSIONS l 205.4 cm Bedside h 20 cm Feet h 12 cm w mattress + 5.4 cm Bedhead h ca. 84 cm, d ca. 8 cm Mattress size: 100 × 200, 120 × 200, 140 × 200, 160 × 200, 180 × 200, 200 × 200 (in cm) Dimensions standard headboard: 112 × 8, 132 × 8, 152 × 8, 172 × 8, 192 × 8, 212 × 8 (in cm) Dimensions extra large headboard: 232 × 8, 252 × 8, 272 × 8 (in cm) SUPPORT FOR SLATTED BASE SYSTEM (SBS) Side support profiles 2.5 × 3 Central support profile 2.5 × 5.5 for SBS Central support profile 2.5 × 7.8 for SILENT Adjustable 10.5, 12.5, 14.5 below top of bed-side

Check on Architonic

MATERIAL Solid wood – Ash white oiled, oak, knotty oak, oak colour stain, American cherry, American walnut, European walnut SURFACE Impregnated with natural hardwax-oil Oak colour stain: matt lacquered VERSION Available in further sizes With integrated slatted frame SILENT, sprung slats beech ply, mounted in silent rubber bearings SUPPORT FOR SLATTED BASE SYSTEM (SBS) Side support profiles 2.5 × 3.5 DIMENSIONS l 205.4 cm h top of bedframe 25/30 cm h bedframe 9/14 cm w bedframe mattress + 5.4 cm Height of bedside 9 cm Mattress 4.0 cm below top of bedside MATTRESS SIZE 100 × 200, 120 × 200, 140 × 200, 160 × 200, 180 × 200, 200 × 200 (in cm)

Check on Architonic

The FLAI bed – better than flying? Not only the name of the bed FLAI relates to the thought of flying, straight and clear lines create a harmonious design and contribute to the floating optic of this bed. The design duo kaschkasch – which means the highly trained carpenters Forian Kallus and Sebastian Schneider- inspire once again through the clever combination of minimalism and poetry. The bed is available either in white or anthracite, thanks to the oiled and waxed birch edge it appears in simple classiness and gives every room a natural warmth. Five different metal shelves can be put on the bedframe allowing an easy handling of magazines, alarm clock and mobile phone. Thanks to wool-felt inlays a quiet and careful use of the spacious shelves is guaranteed. Whether with or without headpiece for further storage space the bed FLAI unites timeless design and high practical use. The additional 3-side-led-lighting makes the bed FLAI completely a high-end-product. FLAI with ambient light The bed FLAI can also be delivered with an integrated three-sided LED-lighting. Therefore a LED-light-band will be mounted on the left, on the right and on the front side below the bedframe and connected with a 220 Volt power supply on the head end. The LED-lighting is dimmable.

Check on Architonic

MATERIAL Solid wood – Ash white oiled, oak, knotty oak, oak colour stain, American cherry, American walnut, knotty American walnut, European walnut SURFACE Impregnated with natural hardwax-oil Oak colour stain: matt lacquered VERSION Headboard in height 67 and 79 available Bed in further sizes available Comfort height: Bedside and feet each heightened 4 cm DIMENSIONS SIMPLE HI 67 h incl. Headboard 67 (measured from ground) SIMPLE HI 79 h incl. Headboard 79 (measured from ground) l 205.4 cm Bedside h 20 cm Feet h 12 cm, w mattress + 5.4 cm Mattress size: 100 × 200, 120 × 200, 140 × 200, 160 × 200, 180 × 200, 200 × 200 (in cm) SUPPORT FOR SLATTED BASE SYSTEM (SBS) Side support profiles 2.5 × 3 Central support profile 2.5 × 5.5 for SBS Central support profile 2.5 × 7.8 for SILENT Adjustable 10.5, 12.5, 14.5 below top of bed-side

Check on Architonic